ENGINEERED FOR.PRECISION BUILT FORPERFORMANCE
MANUFACTURING FACILITIES
A) MIXING OF RUBBER COMPOUND
B) MOULDING OF RUBBER COMPONENT
| SIZE | QUANTITY |
|---|---|
| 10"×10" | 2 |
| 12"×12" | 4 |
| 16"×16" | 8 |
| 18"×18" | 2 |
| 14"×20" | 1 |
| 24"×24" | 1 |
| 28"×28" | 1 |
| TOTAL | 19 |
| QUANTITY |
|---|
| 3 |
C) TRIMMING, CLEANING & BUFFING
D) VISUAL HECKING/INSPECTION/DIMENSION CHECKING
E) GENERATORS
| SPECIFICATION | QUANTITY |
|---|---|
| 62.5 KVA | 1 |
| 125 KVA | 1 |
F) PLASTIC MOULDING
| SPECIFICATION | QUANTITY |
|---|---|
| a) 180 Tonne | 1 |
| b) 170 Tonne | 1 |
| c) 160 Tonne | 1 |
| d) Semi Auto Hydraulic | 3 |
G) Compressors - 2
Testing facilities
A) TENSILE STRENGTH/ELONGATION/MODULUS
i) TENSILE TESTER – 2 NOS.
B) AIR AGEING TESTING & OIL SWELLING
i) OVEN – 2 NOS.
ii) BALANCE, BEAKERS etc AS PER REQUIREMENT
C) HARDNESS TESTING
i) DUROMETER SHORE’A’-3 NOS
ii) DIGITAL DUROMETER SHORE’A’- 1 NOS
iii) IRHD HARDNESS TESTER- 1 NOS
D) DIMENSION CHECKING
i) DIAL VERNIER – 3
ii) LOW PRESSURE VERNIER CALIPER-01 NOS
iii) DIAL THICKNESS GUAGE-2 NOS
iv) DIGITAL THICKNESS GUAGE-01 NOS
v) HEIGHT GUAGE- 01 NOS
vi) BORE GUAGE- 02 NOS
vii) BEVEL PROTECTOR
viii) TORQUE WRENCH- 1 NOS
ix) LUX METER- 01 NOS
x) MICROMETER – 0-25 mm – 1NOS
25-50 mm – 1NOS
E) ASH CONTENT
i) FURNACE – 2
ii) DIGITAL WEIGHING MACHINE
iii) BALANCE/CRUCIBLE etc
F) COMPRESSION TESTING
i)COMPRESSION TESTER (AT FIXED STRAIN) ii)COMPRESSION TESTER (AT CONSTT. STRESS)
G) FLEX TESTING
i) DEMATTIA FLEX TESTER
ii) ROSS FLEX TESTER
H) ABRASION TESTING
i) DU-PONT ABRADER
I) RHEOMETER
